Isolating switching repeater TS-500 Ex

Isolating switching repeater TS-500 Ex

Isolating switching repeater TS-500 Ex
Input for switching contacts, Namur initiators according to DIN EN 60947-5-6 or optocouplers
With 230 V AC or 24 V DC supply voltage
Available as 1- or 2-channel version
Switchable monitoring of the input circuit for wire break and short circuit

Product description Isolating switching repeater TS-500 Ex

  • Input for switching contacts, Namur initiators according to DIN EN 60947-5-6 or optocouplers
  • Input intrinsically safe according to: ATEX II (1) G [Ex ia] IIC/IIB and ATEX II (1) D [Ex iaD]
  • Switchable monitoring of the input circuit for wire break and short circuit
  • Relay (changeover contact) or transistor (potential-free) output
  • Supply voltage 230 V AC or 24 V DC
  • Operation display, switching status display and error indication by LEDs
  • M 22.5 mm standard housing for TS35
  • Rail mounting

 

TS-500 Ex isolating switching amplifiers are suitable for implementing and separating digital switching signals from potentially explosive areas. To the intrinsically safe inputs, all passive encoders, e.g. Switching contacts, Namur initiators according to DIN EN 60947-5-6 or passive electronic outputs of third-party devices can be connected. Depending on the version, the devices are equipped with relay contacts (changeover contacts) or transistors (potential-free) on the output side. The devices must be mounted outside the hazardous area because only the input is intrinsically safe.

Go back